BLASTING BOX, PAINTING AND DRYING BOX, POWDER COATING SHOP, FIRING FURNACE
BLASTING BOX 9x5x5m
- Continuous blasting box with two double doors
- SOLITON full floor collection in the blast box
- SOLITON double-bag conveyor, abrasive cleaner and silo
- Technology control by SIEMENS SIMATIC PLC and FESTO tyres
- Pressure blasting unit 200 l equipped with Thomson valves for blasting steel grit
- AXXIOM/SCHMIDT blasting unit with reduced pressure drop of 1 bar
- Donaldson filter system with filter cartridge change from inside the blast box
- Use of HEPA filter with discharge of filtered air to the outside hall
- Self-supporting box construction with sandwich panel cladding, with internal protection by steel shields and bisonil tarpaulin
- Box with operator's door, fully equipped with safety features
- Remote message technology via PLC and router
- Transportation by rail and trolley with 5,000kg capacity
PAINTING AND DRYING BOX 15x5x5m
- The box is fitted with a four-leaf door opening to one side
- Box with two service doors for the operator, fully equipped with safety features
- Transportation by rail and trolley with a load capacity of 5,000kg
- With technology mounted next to the box
- Natural gas direct combustion burner
- Circulating air volume 42,000m3/h
- Air extraction volume 40,000m3/h
- Drying temperature 60°C, digitally adjustable
- Installed heat output 400kW
MANUAL BAND BOX 6x5x5m
- Continuous paint booth with two double sliding doors
- Transportation by rail and trolley with a load capacity of 5,000kg
- With technology mounted next to the box
- Air extraction rate 30,000m3/h
- Interception of overspray in containers with wheels under the filters
BURNING BELT PACK 4x3x4m
- Maximum firing temperature 200°C
- Circulating air volume 15.000m3/h
- Amount of extracted air 9.00m3/h
- Installed thermal output 180.000 kcal/h
- Natural gas direct combustion burner
- Transportation by rail and trolley with a load capacity of 5,000 kg
